ES-10 12V

Temperature controller for panel mounting.

Digital thermostat with ON/OFF control and adjustable hysteresis. Universal – could be used for heating appliances or refrigeration (DEFROST settings). HEAT / COOL mode selectable. 20A relay enables to control up to 4500W receivers directly.

• Measuring range -50…+150°C
• 20A (4500W) Control Output Relay
• Additional NO/NC potential-free signal input ( for safety thermostat, button)
• 0,1°C accuracy
• Adjustable hysteresis 0,1 to 20°C
• HIGH and LOW temperature ALARM (buzzer)
• Stainless steel IP68 NTC 5k Ohm temperature probe included (2m – could be extended)
• Big LED display
• memory of settings after a power failure
• English User Manual
• MADE IN POLAND

Characteristics:

• Manual controlling the dial
• No possibility of programming, simple change of temperature

Technical specification:

• Current consumption: <2 VA
• Temperature range: 5 – 40^oC
• Limitation of a maximal temperature of a heater – floor: 29^oC
• 2 sensors: built-in sensor of the air temperature sensor of the floor temperature, sensor NTC
• Maximal output load: 16A
• Protective cover: IP21
• Dimensions: 86×86 mm
• Thickness: 12 mm
• Power: DC12V

The set includes:

• Temperature controller with a built-in temperature sensor
• Exterior temperature controller – underfloor controller with a cable
• Box
• Fixing screws

NOTE: the offered device has a possibility of the temperature calibration. The buyer is responsible for a correct instalation with a specialist supervision.

The modes of the temperature controller:

• ROOM – the interior sensor controls the temperature in the room and the floor sensor is off. The mode is used in case the thermostat is to control a heating system different from the floor heating.
• FLOOR – the floor sensor controls the floor temperature and the interior sensor is off. The mode is used when the thermostat is to control the underfloor heating installed in order to gain the comfort of the warm floor, e.g. in the bathroom.
• ALL – the interior sensor controls the temperature in the room while the underfloor sensor limits the floor temperature, protecting it from overheating. The mode is used when the thermostat is to control the underfloor heating which is the heating system of the room.

All-purpose temperature controller designed to control

heating devices:

• electrical heaters, stoves
• heating cables, anti-icing systems
• incubators, terrariums, aquariums
• boilers, heaters, etc.
• central heating and domestic hot water pumps

cooling appliances / refrigeration:

• fridges, refrigerators, freezers, cooling counters
• fans, coolers
• car units 12V

Specifications: