Heating foil uses the ability to accumulate heat through the top layer, laminate, stone or tiles, warms up in a few minutes to a fixed temperature, automatically switch off and gives heat back to the room for several minutes, without consuming electricity at that time. With right control using our thermostat and insulation this system use up to 50% less energy than any other electric heating.
System is very energy efficient even if only 70% floor area is cover provides comfortable and cosy environment. Heat produced by this panels in 100% eliminates moisture, bacteria and moulds. Installed on the wall not only can heat the room but also dry up walls, ensuring the same temperature in all areas with no sudden air movements.

Advantages of usage:

  • Space saving, short assembly time.
  • Heating up time 5 minutes.
  • Approvals IPX7 can be installed in bathrooms zone 0 DC12V only
  • No need to install boiler pipes or chimney
  • No noises or gases.
  • Limitless possibilities for architects .
  • Low investment and usage cost.
  • Easy to remove, can be reinstalled.
  • Minimize heat losses, heat is generated at the place of usage.
  • Can be cut only at the designated area every 250mm.
  • Available in 1 meter 50mm and 250mm wide.
EXPERTS IN INFRARED TECHNOLOGY
Approvals:
ABOUT DIAMOND HEATING FILM
In our offer you can find wide choose of panels AC or DC. Low power will be perfect for the alternative heating (the comfort of a warm floor 60W/m², 80W/m²,140W/m²), but with the higher 180W/m² 220W/m² power as a primary heating source. Our team can help to choose right heating film power, calculate area need to be cover and answer all questions you may have. As a heating film manufacture we can assume that the precision of manufacturing with a functionality makes it irreplaceable in its branch We can produce heating element with specific customer requiems, your company logo, widths or power.
Black diamond mat

Our heating film has highest safety rating IPX7

Approved to  EN 60335-1:2012 as required by the 17th Edition Wiring Regulations (BS7671:2008)
EN 55014-1 : 2006+A1:2009
EN 61000-3-2 :
2006+A:2009+A2:2009
EN 61000-3-3 : 2008
EN 55014-2 : 1997+A1:2001+A2:2008, Caregory II
ISO 9001:2008          ISO 14001:2004
PN-EN60335-2-96:2005 + A2:2009
PN-EN 60335-1: 2012 / BBJ
RoHS  derective  2011/65/EU

MODELWIDTHTHICKNESSPOWER CURRENT METERPOWER SQUARE METERLENGTH ON THE ROLLMAXIMUM TEMPERATUREVOLTAGE
310T100cm0.33mm220 W/m220 W/m²100 m55°CAC 230 V
305T50cm0.33mm110 W/m220 W/m²150 m55°CAC 230 V
305T50cm0.33mm110 W/m220 W/m²150 m55°CAC 230 V
3025T25cm0.33mm55 W/m220 W/m²150 m55°CAC 230 V
310TR100cm0.33mm180 W/m180 W/m²100 m50°CAC 230 V
310TL100cm0.33mm140 W/m140 W/m²100 m40°CAC 230 V
305TL50cm0.33mm70 W/m140 W/m²150 m40°CAC 230 V
3025TL25cm0.33mm35 W/m140 W/m²150 m40°CAC 230 V
310TT100cm0.33mm80 W/m80 W/m²100 m30°CAC 230 V
305TT50cm0.33mm40 W/m80 W/m²150 m30°CAC 230 V
310TH100cm0.33mm60 W/m60 W/m²100 m29°CAC 230 V
305TH50cm0.33mm30 W/m60 W/m²150 m29°CAC 230 V
303DC12V30cm0.33mm67 W/m220 W/m²150 m55°CDC12 V
305-ET50cm0.33mm200 W/m400 W/m²150 m75°CAC230 V
ABOUT DIAMOND HEATING FILM
MODELWIDTHTHICKNESPOWER PER METERPOWER PER SQUARE METERROLL LENGTHROLL WEIGHTMAXIMUM TEMPERATUREVOLTAGE
DTF-505T50 cm0,370 mm110 W220 W130m39kg55°CAC230V
DTF-510T100 cm0,370 mm220 W220 W80m41kg55°CAC230V
DTF-505TL50 cm0,370 mm70 W140 W130m39kg42°CAC230V
DTF-510TL100 cm0,370 mm140 W140 W80m41kg42°CAC230V
DTF-505TT50 cm0,370 mm40 W80 W130m39kg32°CAC230V
DTF-510TT100 cm0,370 mm80 W80 W80m41kg32°CAC230V
DTF-505TH50 cm0,370 mm30 W60 W130m39kg29°CAC230V
DTF-510TH100 cm0,370 mm60 W60 W80m41kg29°CAC230V