The presented temperature controller is manually controlled from the dial level.

The device may work in one of the 3 modes: measuring the temperature of the room, measuring the floor temperature, measuring the room temperature without the floor temperature. The temperature controller is used for the electric underfloor and wall heating as well as for the electric radiators.

Characteristics:

• Manual control via knobs
• No programming, simple temperature change
• Installation: surface mounted!
• Warranty: 12 months
• Signalling with a LED
• External floor sensor included!

Technical specification:

• Power consumption: <2 VA
• Temperature range: 5 – 40 °C
• Limiting the heater maximum temperature floor: 40 °C
• 2 sensors: built-in air temperature sensor + NTC floor temperature sensor
• Maximum output load: 20A
• Protection level: IP21 – can be installed in bathrooms
• Dimensions: 86×86 mm
• Thickness: 12mm
• Power supply: 230 AC

The set includes:

• Thermoregulator with built-in temperature sensor
• External floor temperature sensor with cable
• Box
• Installation screws
• Instructions in English
• Warranty Card

NOTE: the offered device has a possibility of the temperature calibration.

The modes of the temperature controller:

• ROOM – the interior sensor controls the temperature in the room and the floor sensor is off. The mode is used in case the thermostat is to control a heating system different from the floor heating.
• FLOOR – the floor sensor controls the floor temperature and the interior sensor is off. The mode is used when the thermostat is to control the underfloor heating installed in order to gain the comfort of the warm floor, e.g. in the bathroom.
• ALL – the interior sensor controls the temperature in the room while the underfloor sensor limits the floor temperature, protecting it from overheating. The mode is used when the thermostat is to control the underfloor heating which is the heating system of the room.