Heating foil uses the ability to accumulate heat through the top layer, laminate, stone or tiles, warms up in a few minutes to a fixed temperature, automatically switch off and gives heat back to the room for several minutes, without consuming electricity at that time. With right control using our thermostat and insulation this system use up to 50% less energy than any other electric heating.
System is very energy efficient even if only 70% floor area is cover provides comfortable and cosy environment. Heat produced by this panels in 100% eliminates moisture, bacteria and moulds. Installed on the wall not only can heat the room but also dry up walls, ensuring the same temperature in all areas with no sudden air movements.

Advantages of usage:

• Space saving, short assembly time.
• Heating up time 5 minutes.
• Approvals IPX7 can be installed in bathrooms zone 0 DC12V only
• No need to install boiler pipes or chimney
• No noises or gases.
• Limitless possibilities for architects .
• Low investment and usage cost.
• Easy to remove, can be reinstalled.
• Minimize heat losses, heat is generated at the place of usage.
• Can be cut only at the designated area every 250mm.
• Available in 1 meter 50mm and 250mm wide.